Check the installation, usage, and wear of the circular saw blade of the high speed circular saw to assess its impact on cutting efficiency.
High speed circular saw/tube China
Circular saw blade is an important component of high speed circular saw and one of the key factors affecting cutting quality. Therefore, great attention should be paid to the condition of the saw blade during installation and use.
The severe wear and tear of circular saw blades directly affects the cost of cutting and processing, which is very serious for production efficiency; Especially for cutting workpieces, the quality will be greatly reduced, which is unacceptable. Therefore, if such problems are found, they must be solved immediately.
So besides normal wear and tear, what are the reasons for the wear of circular saw blades?
# Installation of high speed circular saw, inspection of the circular saw blade must be strictly carried out according to the relevant instructions, and there should be no loose screws or other situations. Before starting the high speed circular saw, please carefully check the installation of the saw blade and whether there are any iron filings or other inappropriate items on the saw teeth. It is necessary to keep the saw blade clean.
# If the protective blade block of the high speed circular saw is not installed correctly, it will seriously affect the use of the saw blade. Please be sure to check it.
# If the speed and feed rate of the high speed circular saw during operation are too fast, it will greatly increase the consumption of the saw blade, and excessive wear will cause irreparable damage to the saw blade; If the feed speed of the circular saw exceeds the prescribed usage, it will cause serious damage to the saw blade and irreversible damage to the next grinding. Do not adjust these parameters without authorization due to production or other issues.
# The high speed circular saw should not work 24 hours a day when the saw blade has not received reasonable rest. It is necessary to maintain at least 3 hours of rest every day, which not only benefits the stability of circular saw, but also the effectiveness of saw blade use.
# The materials to be cut by sawing must be inspected by the circular saw. Before cutting, the materials that need to be cut must be inspected to a certain extent. Many materials have iron nails or other hard objects on them, which must be cleaned up; otherwise it will cause irreparable damage to the saw blade.