Is there a difference between gaskets and seals?

Is there a difference between gaskets and seals?

Today we’re going to talk about gaskets and seals. These terms are generally used interchangeably. After all, gaskets seal a joint…so they’re the same, aren’t they?

We want to get your thoughts on the matter. We invite you to take a break from reading and answer the poll below. Don’t worry the results are anonymous…and try to avoid the temptation to scan the rest of the article before answering!

Is there a difference between gaskets and seals?

• Most definitely.

• Nope - the same.

301

 votes

 · 

301

 answers

Thanks for taking the time to vote in our poll. Read on for the facts about gaskets and seals.

Gaskets vs. Seals

The terms “gaskets” and “seals” are often used interchangeably. The fundamental difference is that a gasket is a physical piece that goes between two flanges to create a seal at a joining point between two components. A gasket is a seal. “Seals” is a category that encompasses many types of seals. In addition to gaskets, there are rotary seals, O-ring seals, liquid sealants, mechanical seals, shaft seals, valve stem seals, and packings, just to name a few.

Seals

Generally, seals require more machining for the sealing surfaces, and a controlled size or quantity of seal material to make it up. They are typically “engineered” as a solution and designed up front.

“Seals” are also terms noted for non-gasket applications, such as rotary shaft seals. These are a dynamic joint and not something that a flat flange gasket is able to seal.

Gaskets

Gaskets generally function with two flat flanges and the gasket material and construction can sometimes be chosen later in the design stages. Various material constructions are available and must be selected to correlate with the available flanges and parameters.

Now You Know

This has been a very general explanation of this topic, but hopefully it has provided some insight into a basic definition of sealing mechanisms. Back to the trivia question…we admit, it was sort of a trick question. A gasket is a seal, but a seal isn’t necessarily a gasket.

Now it is time to stump your friends. Just make sure they at least know what a gasket is before you pose the question! If you are interested in subscribing to Sealed-In’s blog posts, email sales@mtigasket.com.

Need To Design A Gasket Material? Here Are 6 Questions That You’ll Likely Be Asked.

How many times have you been working with a gasket (by itself or in an application) and wondered if you could change something about it to make it work a little better? Sometimes the options in the market don’t quite meet all of your needs, and you have an idea that just might work! Now, if there was only a way to bring it to fruition…

Do I Need an O-ring or a Gasket?

How well do you understand the differences between O-rings and gaskets? Can you readily identify situations where each type of seal should be used? There are specific situations where each technology is needed because they are designed for completely different conditions. Today, we thought we’d dig a little deeper into gasket vs. O-ring.

The Most Commonly Used Gasket Materials & Why You Need Them All

Imagine this scenario… Your boss needs you to find the best gasket material for a particular application. The first question you need to answer is – What are you trying to seal?

4 Questions to Ask When You Need to Seal Fluids

Whether you are new to the fluid sealing market or you’ve been immersed in it for years, there are some considerations that must be made when you need to seal fluids. This week, we thought we’d lay out the important questions that need to be asked (and why) when you are faced with a joint that requires fluid to be sealed.

4 Questions to Ask When You Need to Seal Gases

Today we’re going to talk about sealing gases. Don’t worry if you aren’t familiar with how to select a proper gasket material to get the job done. Yes, there are things you need to know. No, it’s not impossible to figure out.